REQUEST
INFORMATION
LX Collet or Spring Collet Type Floating Tap or Reamer Holder
The
LX Collet or Spring Collet Type floating tap holders and reamer holders
have a float sleeve to receive interchangeable LX tap and reamer collets.
This allows the holder to be used with a multitude of different tool
shank sizes by simply replacing the LX collet in the tool sleeve.
The Glenco LX Collet floating tool holders are ideal for applications
requiring different tool shank sizes, such as different hole sizes
within a family of parts, on multiple heads, automatics, hand screw
machines, transfer type equipment or any other tapping and reaming
operation.
To change tools, just remove the retaining nut and pull the tool out,
or change the collet for a different size tool, and replace the retaining
nut.
The tap or reamer is acurately centered, firmly gripped on shank by
the collet and driven by the square for positive drive.
Lines up automatically under load. Provides unrestricted float, corrects
misalignment within 1/32" radius (more on the larger size holders).
Operates perfectly in any position. A seperate holder is required
between collet range sizes
Some models in stock, most with 3-5 week delivery. All models also
available with tension, compression and coolant through options.
Repairs of your existing holders and repair parts also available.
Type LX Floating Tool Holders with ACME Shank
LX float sleeve to receive LX collets and an ACME adjustable shank for straight ID or automotive type spindles or adapters.
Type SX Floating Tool Holders with Straight Shank
LX float sleeve to receive LX collets and a straight holder shank for straight ID or automotive type spindles or adapters.
Type TX Floating Tool Holders with Morse Taper Shank
LX float sleeve to receive LX collets and a morse taper holder shank for morse taper spindles or adapters.
